Sunflo 2-in-1 Wall Mixer with Bend — Brass Shower & Spout Mixer

The Sunflo 2-in-1 Wall Mixer with Bend is a solid brass, chrome-plated bathroom fitting that combines an overhead shower and a spout in a single wall-mounted unit, controlled through one quarter-turn handle for both flow and temperature. It's an exposed, surface-mounted fitting rather than one concealed inside the wall, which makes it simpler to install and far easier to service later. Manufactured factory-direct at Sunflo's own facility in Salem, Tamil Nadu, it's priced at ₹5,055 and built specifically to handle the hard water conditions common across the state without the scaling and corrosion that shorten the life of lighter, thinly-plated fittings.

What Makes This a "2-in-1"?

A wall mixer is a single fitting that blends hot and cold water through one exposed unit mounted on the wall, rather than hidden inside it. The "2-in-1" refers to what that single unit controls: an overhead shower and a spout, both fed from the same mixed water supply, using the included bend pipe to carry water up to the shower position. (A "3-in-1" adds a third outlet, usually a handheld shower.)

This is different from a concealed diverter, which is built into the wall before tiling and needs precise planning at the plumbing stage. A wall mixer like this one sits on the surface — generally more affordable to buy, and far easier to service or replace later without breaking into tiled walls.

Built for Tamil Nadu's Water, Not Just the Showroom Photo

Solid brass body, genuine chrome plating. Unlike lighter zinc-alloy fittings that only look like brass under the plating, this wall mixer is built on a solid brass body. That matters most in hard water areas — including much of Tamil Nadu, where groundwater and borewell supply is common — where thinner metals and single-layer plating scale, pit, and dull within a year or two of daily use.

One unit, two outlets. The 2-in-1 design routes mixed water to both an overhead shower and a spout from a single wall-mounted mixer, using the included bend pipe to reach the shower position — no separate diverter or extra fitting required.

Factory-tested before it ships. Every unit is pressure-tested at the factory for leaks before dispatch, rather than relying on installation to be the first real test.

Quarter-turn control. A quarter-turn of the handle moves smoothly from off to full flow, blending temperature in between — a more durable mechanism than older full-turn taps, which rely on rubber washers that wear out and drip sooner.

Foam-flow aerator. Built into the outlet to even out water pressure and reduce splashing, without a noticeable drop in flow.

Specifications

Where This Fits

This wall mixer works in any bathroom with a shower — master bathrooms, guest bathrooms, and new-construction bathrooms alike — wherever you want a shower and spout together without the extra planning a concealed diverter needs at the tiling stage. It pairs naturally with Sunflo's bib cock taps for a wash basin, or the bathroom accessories range — angle valves, connection tubes, and flanges — to complete the installation.

Why Buy Factory-Direct

Sunflo manufactures this wall mixer in-house at its own facility in Salem, Tamil Nadu, and sells it factory-direct — which is why solid brass construction is priced closer to a mid-range showroom tap than a premium one. Every order ships free, with a 15-day return window if it isn't the right fit.

Frequently Asked Questions

What does "2-in-1" mean in this wall mixer?

It means one wall-mounted unit controls two outlets — an overhead shower and a spout — from a single mixed hot-and-cold water supply, using the included bend pipe to route water up to the shower position.

What's the difference between this wall mixer and a concealed diverter?

This wall mixer is surface-mounted, with all its plumbing exposed on the wall, while a diverter is built into the wall before tiling. Wall mixers are generally more affordable and far easier to service or replace later, since nothing needs to be broken open to reach them.

Is this wall mixer suitable for hard water areas like Tamil Nadu?

Yes. Its solid brass body and chrome plating resist the scaling and corrosion that hard water causes, which is a common issue in areas that rely on groundwater or borewell supply.

What height should this wall mixer be installed at?

Wall mixers are typically installed around 36 inches (3 feet) from the floor, leaving enough clearance to fill a bucket underneath. Confirm the exact height with your plumber based on your bathroom's layout.

What's the return policy if this isn't right for my bathroom?

Sunflo offers a 15-day return window on standard products from the date of invoice, with returns processed within 10 working days.

Ready to Upgrade Your Shower?

Add it to your cart, browse the full 2-in-1 wall mixer collection for other price points, or get in touch if you'd like help confirming it's the right fit before you order.